One tractor. One operator. Row and under-panel cutting together.
The main deck handles the row while one or two in-row mowing heads extend beneath the array where row geometry and clearance permit. Fischer solar farm mowers operate with precision sensor-guided mowing heads moving around posts and supports.

Many sites mow the open row and finish beneath the panels as separate operations. Fischer's in-row approach is designed to combine those jobs on tractor-accessible sites.
The main deck cuts the row while one or two in-row heads work beneath the adjacent panels.
An adjustable sensor rod guides the head around row obstacles. The Fischer Solar Mower Line shows the head moving aside at a post and returning once clear.
PTO-driven agricultural mowers with model-specific hitch, hydraulic and driveline requirements.
Select the mower by row or pile spacing, lowest mowing clearance, tractor and terrain.
Use the table to narrow the lineup by head count, tractor horsepower, working range and primary fit. MG can confirm the final configuration against your site dimensions and tractor requirements.
| Model | In-row heads | Tractor HP | Published width or row configuration | MG-listed applications | Site-fit summary |
|---|---|---|---|---|---|
| SL Deck Mower | 1 | 40 to 100 | 49 to 161 in. mowing width across nine models | Vineyards, orchards, solar, roadside | Low, compact design that may suit tighter-clearance or narrow-row sites |
| GLT Deck Mower | 2 | 30 to 120 | Approx. 4 to 16 ft row configurations; 24+ model sizes | Vineyards, orchards, solar | Two heads can work beneath adjacent rows where geometry and reach permit |
| GLK Folding Deck Mower | 2 | 90 to 140 | Model-specific folding configurations | Orchards, solar, roadside | Wide-area folding mower with transport position |
| Canguro Folding Deck Mower | None | 50 to 120 | 135 to 273 in. cutting width | Orchards and roadside | Supporting open-ground mower for solar rows, roads and perimeter; no in-row heads |
The mower combines three functions.
The main deck is PTO-driven. On the SL and GLT, the in-row heads are mechanically belt-driven.
The in-row head's reach or offset is set to match the row geometry.
An adjustable sensor rod runs ahead of the in-row mowing head and displaces when in contact with a post. The head folds inwards and returns out when it clears.
Long, consistent rows are a strong fit. Two-head models can work beneath both adjacent rows where geometry and reach permit.
Measure the lowest clearance at the site's approved mowing position and provide the tracker geometry when requesting a configuration.
Even where grazing handles the under-panel strip, mowing may still be needed for rows, access roads and perimeter areas.
Follow the site's vegetation plan for cutting height and timing. Adjustment method varies by mower model.
Smaller SL and Canguro configurations may pair with compatible compact tractors on smaller sites.
The Canguro is specifically described for fence lines and guard-rail supports. SL, GLK and Canguro are also published for roadside use.
Best suited to tractor-accessible ground. Use alternative equipment where tractor access is unsuitable.
Where the row and under-panel strip are handled as separate operations, a suitable in-row mower can combine them into the same tractor pass. The time and labor saved depend on site geometry, ground conditions and the current maintenance method.
MG stocks OEM replacement parts and provides online quick-order and parts-catalog search tools.
Products are sold and serviced through dealers across the entire US and Canada. Contact MG for the nearest authorized dealer and service center.
Warranty registration is available online through Support.
For tractor-accessible sites, an in-row deck mower can cut the row and under-panel strip in the same pass. The best model depends on row geometry, panel clearance, tractor requirements and whether one or two in-row heads are needed.
In-row mowing heads are actuated by an adjustable sensor rod and hydraulic piston. When in contact with a post or riser, the head will displace hydraulically and return back in the row once clear. Confirm post-sensing suitability for selected model and configuration.
Fit depends on the tracker position and available clearance. Provide the lowest clearance at the approved mowing position, together with the row geometry and tractor details.
Published ranges are 30 to 120 HP for the GLT series, 50 to 120 HP for the Canguro, 40 to 100 HP for the SL series and 90 to 140 HP for the large GL6K-GL8K series mowers. Requirements vary by model and configuration.
MG sells and services its products through a dealer network across the entire US and Canada, stocks OEM replacement parts and provides online warranty registration.
Send your row or pile spacing, lowest mowing clearance, tractor make, model and horsepower, and site location or terrain notes. MG can use them to identify suitable configurations and connect you with a dealer.
MG Equipment Company
PO Box 655, Vineburg, CA 95487
707-996-2605 | [email protected]
Copyright © 2026 MG Equipment Company. All Rights Reserved. - Privacy Policy